Link to ARI Home Page Link to ARI Products Link to ARI Specialized Services Link to Technical Data Hub Link to Online Ordering Information

Link to AutoSEM Image/XRay Anlayzer Page Link to Preamplifiers for PMTs and Photo Diodes Page Link to Photon Counters and Rate Meters Page Link to PC Interfaces Page Link to Power Supplies Page

Technical Data for Power Supplies

Power Supply part number F-100PS

The F-100PS Power Supply is a low noise power supply for preamplifiers. It serves as a clean source of power. It is connected to the preamplifier with a single cable and provides BNC output connectors for the signal from the preamplifier.

Output±15VDC/.25A
Noise<0.2mVrms
Power Requirements115 or 220VAC (specify), ¼A

Download the data sheet as a PDF file.

Price: $220.00 TO $328.00
Available options: TTL or ECL to NIM converter.


Power Supply part number W-130PS

The W-130PS is an economical power supply that works with most of the Advanced Research Instruments preamplifiers. It serves as a clean source of power and connects to the preamplifier via a single DB9 cable.

Output±12VDC/130mA
Noise<0.25mVrms
Power Requirements115VAC

Download the data sheet as a PDF file.

Price: $80.00 to $100.00


High Voltage Power Supply part number PMT-2000

The lowest noise, high voltage power supply available. This power supply is essential for low noise, low background (with EMI/RFI line filter), and positive biasing.

Output Voltage2 KV3 KV5 KV7.5 KV
Output Current2 mA1 mA0.5 mA0.25 mA
Output Noise p-p<100 µV<100 µV<300 µV<500 µV
Output PolarityFixed Positive or Negative (Specify)
Output ConnectorSHV type standard
Line Regulation.0001% per 10% Line Change
Load Regulation.007% per 10% Load Change
Temperature Stability100ppm/°C (0 - 49°C)
OptionRemote Control (0 - 9VDC full scale)
Power Requirement115VAC or 220VAC (specify), ¼A

Download the PMT-2000 data sheet as a PDF file.

Download the Remote Control data sheet as a PDF file.

Price: $980.00 TO $2088.00
Available options: Remote Voltage Programming.


Dual High Voltage Power Supply part number D5K

Dual low noise, high voltage power supply to provide bias for an electron multiplier and an accelerating voltage for the front end of the detector. The unit has independent bias and accelerating potential control/display.

Detector Voltage0 to +7.5KV (less accelerator voltage)
Accelerator Voltage0 to +5KV
Output Current0.5 mA
Output Noise p-p<500 µV
Output PolarityFixed Positive
Output ConnectorSHV type standard
Line Regulation.0001% per 10% Line Change
Load Regulation.007% per 10% Load Change
Temperature Stability100ppm/°C (0 - 49°C)
Power Requirement115VAC or 220VAC (specify), ¼A

Price: $2700.00 TO $3375.00


   Email us for more information..... Link to email for ARI Corp



Please direct any questions or problems with this site to the Webmaster.